SOCIETY FOR BRAIN MAPPING AND THERAPEUTICS

SOCIETY FOR BRAIN MAPPING AND THERAPEUTICS

BREAKING BOUNDARIES OF SCIENCE, TECHNOLOGY, MEDICINE, ART & HEALTHCARE POLICY

Search
Close this search box.

The JPL Electronic Nose (ENose) is a full-time, continuously operating event monitor designed to detect air contamination from spills and leaks in the crew habitat in the International Space Station. It fills the long-standing gap between onboard alarms and complex analytical instruments. ENose provides rapid, early identification and quantification of atmospheric changes caused by chemical species to which it has been trained. ENose can also be used to monitor cleanup processes after a leak or a spill.

Experiment Description


RESEARCH OVERVIEW

DESCRIPTION

The JPL Electronic Nose (ENose) is an array-based sensing system which contains 32 conductometric sensors. The Second Generation ENose was trained to detect, identify and quantify 21 chemical species, the majority of which are organic solvents or commonly used organic compounds, which might be released through a leak or a spill in a spacecraft crew cabin. It was extensively ground-tested, and includes data analysis software which will identify and quantify the release of a target chemical within 40 minutes of detection.

Past ENose investigations have focused on organic compounds such as common solvents and a few selected inorganic compounds, ammonia, water and hydrazine. For the new ENose to be performed on the ISS, two inorganic species have now been added to the analyte set, mercury and sulfur dioxide. To accommodate these inorganic species, the sensor array will incorporate a hybrid sensor approach, including both new sensing materials and new sensing platforms made up of microhotplate sensor substrates. Materials approaches to these analytes have been determined using models of sensor-analyte response developed under this program. Predictive models will also be used to complement array training for additional software analyses including chemical family identification and identification of unknown analytes. Analysis of data taken by the sensor array will be included on the ENose control computer, and event analysis will be available within 40 minutes of event onset.

The ENose event monitor, by identifying and quantifying trained-for chemical species, fills the gap between an alarm (which provides no ID or quantification) and high-end analytical instruments. ENose has demonstrated a wide dynamic range, ranging from fractional ppm to 10,000 ppm. Its array based sensing mechanism means that it can be trained to detect new chemical species, and training data can be uplinked to add new species to its on-board data library. ENose runs continuously (30 to 360 data points/hr) and autonomously; it requires only minimal crew interaction and requires no consumables. The ENose is low mass (less than 4 kg), small volume (less than 4 liters) and low power (less than 20 W), in addition to being microgravity-insensitive, robust, and rugged. It is capable of analyzing volatile aerosols as well as vapors.

Future applications of the JPL ENose may also include environments other than the spacecraft crew cabin and similar enclosed environments. Such applications may include integration with larger devices such as analytical instruments, and with environmental monitoring and control systems.

back to top

Applications


SPACE APPLICATIONS

The JPL ENose is envisioned to be one part of a distributed system for automated monitoring and control of the breathing atmosphere in inhabited spacecraft in microgravity. It is designed as an event or incident monitor, capable of providing rapid, early identification and quantification of changes in the atmosphere caused by leaks or spills of compounds to which the device has been trained. The flexibility of the device includes the ability to be trained to new compounds, the possibility of providing sensor sets for particular analyte suites, and a wide dynamic range (fractional ppm to 10,000 ppm), making it a valuable part of an air quality monitoring and control system that is comprised of several types of instruments. Such a system can be included in an environmental control system which actuates remediation of anomalous events.

EARTH APPLICATIONS

Many important and diverse Earth-based applications exist for ENose technology. One major driver is the current need for advanced detection devices for security (both civilian and military) and health safety applications, such as the detection of explosives and infection monitoring.

back to top

Operations


OPERATIONAL REQUIREMENTS AND PROTOCOLS

Upon arrival on board ISS, ENose will be unpacked from stowage and set up by a crewmember. ENose will be affixed to an EXPRESS Rack for power. ENose will run continuously for minimum of six months; data will be transferred to ground in Health and Status packets and in periodic file transfer. Data will also be archived in ENose until file transfer (up to 30 days). The crewmembers will perform periodic confirmational events to collect air samples in vicinity of ENose for analysis on ground.

ISS crewmembers will retrieve the ENose from stowage and install it on an EXPRESS Rack with a bracket assembly and/or Velcro; connect the power cable and the data cable. ENose will be powered on and the crewmember will verify the following: LED illumination; display operation; clear air inlet and outlets. ENose is autonomous with possible occasional crew commanding and periodic status checks (once or twice per month). Crewmembers will have periodic attended events if ENose detects a potential spill or leak. When ENose is relocated, the crewmember will need to reset the IP address.


RESULTS PUBLICATIONS

Copy citations

FLIGHT PREPARATION RESULTS PUBLICATIONS